Each linetype is defined on two lines in a LIN file. The first line defines the linetype name and provides for an optional description.
*linetype-name [, description]
This line must begin with an asterisk and must be immediately followed by the linetype name. If the description is provided, it must be separated from the name by a comma and no longer than 47 characters. The description is not used by AutoCAD; it is intended to help you visualize the appearance of the linetype.
The second line is the code that describes the actual pattern.
alignment,patdesc-1,patdesc-2, ...
This line begins with the alignment code (currently only A is allowed), followed by a comma-delimited list of pattern descriptors (no spaces are allowed).
When you create a linetype, it is not loaded into your drawing automatically. Use the Load option of theLINETYPE command.
全部回复（3 ）
只看楼主 我来说两句-
fen
沙发
Each linetype is defined on two lines in a LIN file. The first line defines the linetype name and provides for an optional description.
2002-12-18 12:35:18
赞同0
-
fen
板凳
自定义线型如下：
2002-12-18 12:33:18
赞同0
加载更多*linetype-name [, description]
This line must begin with an asterisk and must be immediately followed by the linetype name. If the description is provided, it must be separated from the name by a comma and no longer than 47 characters. The description is not used by AutoCAD; it is intended to help you visualize the appearance of the linetype.
The second line is the code that describes the actual pattern.
alignment,patdesc-1,patdesc-2, ...
This line begins with the alignment code (currently only A is allowed), followed by a comma-delimited list of pattern descriptors (no spaces are allowed).
When you create a linetype, it is not loaded into your drawing automatically. Use the Load option of theLINETYPE command.
回复 举报
下笔走长度3，抬笔走长度0.25，写文字G，使用字形为STANDARD，文字插入点坐标X=-0.08,Y=-0.125，抬笔走长度0.25
回复 举报