向各位高手请教工艺

水质如下：
污染项 单位 进水水质 出水要求
pH 2.32 ` 6-9
Biological Oxygen Demand (BOD) mg/l 19.4 <30
Chemical Oxygen Demand (COD) mg/l 185.8 <50
Total Suspended Solids (TSS) mg/l 33.0 <50
Total Dissolved Solids (TDS) mg/l 598.00 <1000
Chloride (as Cl) mg/l 7.50 <500
Fluoride (as F) mg/l 38.00 <10
Oil & Grease (Hydrocarbons) mg/l 37 <5.0
Iron (as Fe) mg/l 0.3 <1.0
Lead (as Pb) mg/l 0.3 <0.1
Ammonium (as NH4) mg/l 2.32 <5.0
水量为35m3/hr,采用什么工艺比较合适？

[ 本帖最后由 ouyangandxw 于 2010-12-9 12:17 编辑 ]